View T530X108M004A_7608695.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 1 benefts ? esr: 4 m to 40 m ? 125c maximum operating temperature ? polymer cathode technology ? high frequency capacitance retention ? non-ignition failure mode ? capacitance: 150 f to 1,500 f ? 100% accelerated steady state aging ? 100% surge current tested ? utilizes multiple tantalum anode technology ? volumetric effciency ? use up to 90% of rated voltage (10% derating) for part types 10 v ? use up to 80% of rated voltage (20% derating) for part types > 10 v ? self-healing mechanism ? eia standard case sizes applications typical applications include high speed server, microprocessor decoupling and high ripple current applications. overview the kemet organic capacitor (ko-cap) is a tantalum capacitor with a ta anode and ta 2 o 5 dielectric. a conductive organic polymer replaces the traditionally used mno 2 as the cathode plate of the capacitor. this results in very low esr and improved capacitance retention at high frequency. the ko- cap also exhibits a benign failure mode which eliminates the ignition failures that can occur in standard mno 2 tantalum types. ko-caps may also be operated at steady state voltages up to 90% of rated voltage for part types with rated voltages of 10 volts and up to 80% of rated voltage for part types >10 volts with equivalent or better reliability than traditional mno 2 tantalum capacitors operated at 50% of rated voltage. the t530 series ko-cap offers the same advantages as the t520 series but also has the added advantages of higher capacitance, 125c performance capability, higher ripple current handling capability and a lower esr range. packaged as multiple anodes to reduce the depth that the signal must penetrate, this parallel arrangement reduces the esr further still to achieve the highest capacitance and lowest esr of any other type of surface mount capacitor with typical esr values as low as 4 m. with reduced esr, the enhanced capacitance retention at higher frequencies provides the lowest total capacitance and most economical solution for high power applications. kemet organic capacitor (ko-cap) t530 high capacitance/125c rated polymer tantalum environmental compliance rohs compliant (6/6) according to directive 2002/95/ec when ordered with 100% sn solder one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 2 2 spice for a detailed analysis of specifc part numbers, please visit www.kemet.com for a free download of kemet's spice software. the kemet spice program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and dc bias conditions. ordering information t 530 x 337 m 010 a t e005 capacitor class series case size capacitance code (pf) capacitance tolerance voltage failure rate/ design lead material esr code packaging (c-spec) t = tantalum 530 = high capacitance 125c rated polymer d, x, y first two digits represent signifcant fgures. third digit specifes number of zeros. m = 20% 2r5 = 2.5 v 003 = 3 v 004 = 4 v 006 = 6.3 v 010 = 10 v 016 = 16 v a = n/a t = 100% matte tin (sn) plated h = tin/lead (snpb) solder coated (5% pb minimum) g = gold plated e = esr last three digits specify esr in m (005 = 5 m ) blank = 7" reel 7280 = 13" reel performance characteristics item performance characteristics operating temperature -55c to 125c rated capacitance range 150 C 1,500 f @ 120 hz/25c capacitance tolerance m tolerance (20%) rated voltage range 2.5 C 16 v df (120 hz) 8% esr (100 khz) refer to part number electrical specifcation table leakage current 0.1 cv (a) at rated voltage after 5 minutes kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 3 3 qualifcation test condition characteristics endurance 105c @ rated voltage, 2,000 hours 125c @ 2/3 rated voltage, 2,000 hours c/c within -20%/+10% of initial value df initial limit dcl 2 x initial limit @ 125oc esr 2 x initial limit storage life 125c @ 0 volts, 2,000 hours c/c within -20%/+10% of initial value within initial limits dcl within 2.0 x initial limit esr within 2.0 x initial limit humidity 60c, 90% rh, 1,000 hours, no load c/c within -5%/+35% of initial value df initial limit dcl within 3.0 x initial limit temperature stability extreme temperature exposure at a succession of continuous steps at +25oc, -55oc, +25oc, +85oc, +105oc, +25oc +25c -55c & & && i l* 20% 20% 30% df il il 1.2 x il 1.5 x il dcl il n/a 10 x il 10 x il surge voltage 105c, 1.32 x rated voltage, 33 resistance, 1,000 cycles c/c within -20%/+10% of initial value df within initial limits dcl within initial limits esr within initial limits mechanical shock/vibration milCstdC202, method 213, condition i, 100 g peak milCstdC202, method 204, condition d, 10 hz to 2,000 hz, 20 g peak c/c within 10% of initial value df within initial limits dcl within initial limits *il = initial limit certifcation dscc drawing 04052 kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 4 4 1 1 0 1 0 0 1 , 0 0 0 1 0 0 1 , 0 0 0 1 0 , 0 0 0 1 0 0 , 0 0 0 1 , 0 0 0 , 0 0 0 1 0 , 0 0 0 , 0 0 0 c a p a c i t a n c e ( f ) f r e q u e n c y ( h z ) t 5 3 0 d 2 2 7 m 0 0 6 a t e 0 0 6 t 5 3 0 y 3 3 7 m 0 0 6 a t e 0 0 5 t 5 3 0 x 4 7 7 m 0 0 6 a t e 0 0 4 capacitance vs. frequency esr vs. frequency 0 . 0 0 1 0 . 0 1 0 . 1 1 1 0 1 0 0 1 , 0 0 0 1 0 , 0 0 0 1 0 0 , 0 0 0 1 , 0 0 0 , 0 0 0 1 0 , 0 0 0 , 0 0 0 i m p e d a n c e , e s r ( o h m s ) f r e q u e n c y ( h z ) t 5 3 0 d 2 2 7 m 0 0 6 a t e 0 0 6 _ i m p t 5 3 0 y 3 3 7 m 0 0 6 a t e 0 0 5 _ i m p t 5 3 0 x 4 7 7 m 0 0 6 a t e 0 0 4 _ i m p t 5 3 0 d 2 2 7 m 0 0 6 a t e 0 0 6 _ e s r t 5 3 0 y 3 3 7 m 0 0 6 a t e 0 0 5 _ e s r t 5 3 0 x 4 7 7 m 0 0 6 a t e 0 0 4 _ e s r dimensions C millimeters (inches) metric will govern 15 termination cutout at kemet?s option, either end case size component kemet eia l* : h* f* 0.1 (.004) s* 0.3 (.012) b* 0.15 (ref) .006 x (ref) p (ref) r (ref) t (ref) a (min) g (ref) e (ref) d 7343C31 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 2.8 0.3 (0.110 0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) x 7343C43 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 4.0 0.3 (0.157 0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) y 7343C40 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 4.0 (0.157) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) notes: (ref) C dimensions provided for reference only. no dimensions are provided for b, p or r because low profle cases do not have a bevel or a notch. * milCprfC55365/8 specifed dimensions kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum electrical characteristics
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 5 5 rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity rated temp vdc f kemet/eia (see below for part options) a @ +20c maximum/ 5 minutes % @ +20c 120 hz maximum m @ +20c 100 khz maximum (ma) +45c 100 khz temperature 260 o c (o c) 2.5 470 d/7343-31 t530d477m2r5a(1)e005 118 8 5 7100 3 125 2.5 470 d/7343-31 t530d477m2r5a(1)e006 118 8 6 6500 3 125 2.5 470 d/7343-31 t530d477m2r5a(1)e010 118 8 10 5000 3 125 2.5 560 d/7343-31 t530d567m2r5a(1)e005 140 8 5 7100 3 125 2.5 680 y/7343-40 t530y687m2r5a(1)e005 170 8 5 7300 3 125 2.5 680 y/7343-40 t530y687m2r5a(1)e006 170 8 6 6600 3 125 2.5 680 y/7343-40 t530y687m2r5a(1)e007 170 8 7 6100 3 125 2.5 680 d/7343-31 t530d687m2r5a(1)e006 170 8 6 6500 3 125 2.5 680 d/7343-31 t530d687m2r5a(1)e010 170 8 10 5000 3 125 2.5 680 d/7343-31 t530d687m2r5a(1)e007 170 8 7 6000 3 125 2.5 680 x/7343-43 t530x687m2r5a(1)e006 170 8 6 6700 3 125 2.5 1000 y/7343-40 t530y108m2r5a(1)e005 250 8 5 7300 3 125 2.5 1000 y/7343-40 t530y108m2r5a(1)e006 250 8 6 6600 3 125 2.5 1000 x/7343-43 t530x108m2r5a(1)e004 250 8 4 8200 3 125 2.5 1000 x/7343-43 t530x108m2r5a(1)e005 250 8 5 7300 3 125 2.5 1000 x/7343-43 t530x108m2r5a(1)e006 250 8 6 6700 3 125 2.5 1500 x/7343-43 t530x158m2r5a(1)e005 375 8 5 7300 3 125 3 470 d/7343-31 t530d477m003a(1)e010 141 8 10 5000 3 125 3 680 d/7343-31 t530d687m003a(1)e010 204 8 10 5000 3 125 3 1000 x/7343-43 t530x108m003a(1)e010 300 8 10 5200 3 125 3 1500 x/7343-43 t530x158m003a(1)e008 450 8 8 5800 3 125 4 330 d/7343-31 t530d337m004a(1)e005 132 8 5 7100 3 125 4 330 d/7343-31 t530d337m004a(1)e006 132 8 6 6500 3 125 4 470 d/7343-31 t530d477m004a(1)e006 188 8 6 6500 3 125 4 470 d/7343-31 t530d477m004a(1)e010 188 8 10 5000 3 125 4 470 y/7343-40 t530y477m004a(1)e005 188 8 5 7300 3 125 4 470 y/7343-40 t530y477m004a(1)e006 188 8 6 6600 3 125 4 680 y/7343-40 t530y687m004a(1)e005 272 8 5 7300 3 125 4 680 x/7343-43 t530x687m004a(1)e004 272 8 4 8200 3 125 4 680 x/7343-43 t530x687m004a(1)e005 272 8 5 7300 3 125 4 680 x/7343-43 t530x687m004a(1)e006 272 8 6 6700 3 125 4 680 x/7343-43 t530x687m004a(1)e010 272 8 10 5200 3 125 4 1000 x/7343-43 T530X108M004A(1)e006 400 8 6 6700 3 125 6.3 220 d/7343-31 t530d227m006a(1)e005 139 8 5 7100 3 125 6.3 220 d/7343-31 t530d227m006a(1)e006 139 8 6 6500 3 125 6.3 330 d/7343-31 t530d337m006a(1)e006 208 8 6 6500 3 125 6.3 330 d/7343-31 t530d337m006a(1)e010 208 8 10 5000 3 125 6.3 330 y/7343-40 t530y337m006a(1)e005 208 8 5 7300 3 125 6.3 330 y/7343-40 t530y337m006a(1)e006 208 8 6 6600 3 125 6.3 330 y/7343-40 t530y337m006a(1)e010 208 8 10 5100 3 125 6.3 470 y/7343-40 t530y477m006a(1)e005 296 8 5 7300 3 125 6.3 470 x/7343-43 t530x477m006a(1)e004 296 8 4 8200 3 125 6.3 470 x/7343-43 t530x477m006a(1)e005 296 8 5 7300 3 125 6.3 470 x/7343-43 t530x477m006a(1)e006 296 8 6 6700 3 125 6.3 470 x/7343-43 t530x477m006a(1)e010 296 8 10 5200 3 125 6.3 680 x/7343-43 t530x687m006a(1)e010 428 8 10 5200 3 125 6.3 680 x/7343-43 t530x687m006a(1)e018 428 8 18 3900 3 125 10 150 d/7343-31 t530d157m010a(1)e005 150 8 5 7100 3 125 10 150 d/7343-31 t530d157m010a(1)e006 150 8 6 6500 3 125 10 150 d/7343-31 t530d157m010a(1)e010 150 8 10 5000 3 125 vdc f kemet/eia (see below for part options) a @ +20c maximum/ 5 minutes % @ +20c 120 hz maximum m @ +20c 100 khz maximum (ma) +45c 100 khz temperature 260 o c (o c) rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity rated temp table 1 C ratings & part number reference (1) standard with tin terminations (14th character = t). tin/lead terminations is also available (14th character = h). also available on large (13 inch) reels. add 7280 to the end of the part number. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitutions will be marked with the higher voltage rating. substitutions can include better than series. kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 6 6 rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity rated temp vdc f kemet/eia (see below for part options) a @ +20c maximum/ 5 minutes % @ +20c 120 hz maximum m @ +20c 100 khz maximum (ma) +45c 100 khz temperature 260 o c (o c) 10 220 d/7343-31 t530d227m010a(1)e006 220 8 6 6500 3 125 10 220 d/7343-31 t530d227m010a(1)e010 220 8 10 5000 3 125 10 220 y/7343-40 t530y227m010a(1)e006 220 8 6 6600 3 125 10 330 x/7343-43 t530x337m010a(1)e004 330 8 4 8200 3 125 10 330 x/7343-43 t530x337m010a(1)e005 330 8 5 7300 3 125 10 330 x/7343-43 t530x337m010a(1)e006 330 8 6 6700 3 125 10 330 x/7343-43 t530x337m010a(1)e010 330 8 10 5200 3 125 16 150 x/7343-43 t530x157m016a(1)e015 240 8 15 4200 3 125 16 150 x/7343-43 t530x157m016a(1)e025 240 8 25 3300 3 125 16 150 x/7343-43 t530x157m016a(1)e040 240 8 40 2600 3 125 vdc f kemet/eia (see below for part options) a @ +20c maximum/ 5 minutes % @ +20c 120 hz maximum m @ +20c 100 khz maximum (ma) +45c 100 khz temperature 260 o c (o c) rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current moisture sensitivity rated temp table 1 C ratings & part number reference cont'd (1) standard with tin terminations (14th character = t). tin/lead terminations is also available (14th character = h). also available on large (13 inch) reels. add 7280 to the end of the part number. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitutions will be marked with the higher voltage rating. substitutions can include better than series. kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 7 7 5 0 % 5 5 % 6 0 % 6 5 % 7 0 % 7 5 % 8 0 % 8 5 % 9 0 % 9 5 % 1 0 0 % - 5 5 2 5 4 5 8 5 1 0 5 1 2 5 % r a t e d v ol t a g e t e m p e r a t u r e (oc) m a x i m u m t r a n s i e n t v o l t a g e r e c o m m e n d e d a p p l i c a t i o n v o l t a g e v r 1 0 v r e c o m m e n d e d a p p l i c a t i o n v o l t a g e v r > 1 0 v 6 7% 6 0% 54% derating guidelines voltage rating maximum recommended steady state voltage maximum recommended transient voltage (1 ms C 1 s) -55c to 105c 99 r 9 90% of v r v r v r = 16v 80% of v r v r 105c to 125c 99 r 9 60% of v r 67% of v r v r = 16 v 54% of v r 67% of v r v r = rated voltage ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage which may be applied is limited by two criteria: 1. the positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. 2. the negative peak ac voltage in combination with bias yrodjh li dq pxv qr hfhhg kh doorzdeoh olplv vshflhg iru reverse voltage. see the reverse voltage section for allowable limits. the maximum power dissipation by case size can be determined using the table at right. the maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. refer to the table below for temperature compensation requirements. temperature compensation multipliers for maximum power dissipation t 45c &7 & & 7 & 1.00 0.70 0.25 t= environmental temperature using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = p max/r e(max) = z p max/r i = rms ripple current (amperes) e = rms ripple voltage (volts) p max = maximum power dissipation (watts) r = esr at specifed frequency (ohms) z = impedance at specifed frequency (ohms) case code eia case code maximum power dissipation (p max) mwatts @ 45c with +30c rise w 7343-15 325 z 7343-17 325 d 7343-31 255 y 7343-40 263 x 7443-43 270 the maximum power dissipation rating must be reduced with increasing environmental operating temperatures. refer to the temperature compensation multiplier table for details. kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 8 8 reverse voltage polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. these devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. temperature permissible transient reverse voltage 25c 15% of rated voltage 55c 10% of rated voltage 85c 5% of rated voltage 105c 3% of rated voltage 125c* 1% of rated voltage *for series rated to 125c table 2 C land dimensions/courtyard kemet metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia w l s l s l s a 3216C18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 b 3528C21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 c 6032C25 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 d 7343C31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 l 6032-19 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 m 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 h 7360-20 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 e 1 7360C38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 q 7343-12 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 r 2 2012-12 1.05 1.83 0.15 4.82 2.50 0.93 1.50 0.22 3.72 2.00 0.83 1.12 0.38 2.86 1.74 s 2 3216C12 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 t 3528C12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 u 6032C15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 v 7343C20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 : 7343C15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 x 1 7343C43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 y 1 7343C40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component desity product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). 1 height of these chips may create problems in wave soldering. 2 land pattern geometry is too small for silkscreen outline. kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 9 9 t i m e t e m p e r a t u r e t s m i n 2 5oc to peak t l t s 2 5 t p t s m a x t l t p m a x imum r a m p u p r a t e = 3oc/seconds m a x imum r a m p d o w n r a t e = 6oc/seconds soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir, or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. please note that although the x/7343C43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) dictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be removed immediately. wiping the edges of a chip and heating the top surface is not recommended. during typical refow operations, a slight darkening of the gold- colored epoxy may be observed. this slight darkening is normal and not harmful to the product. marking permanency is not affected by this change. profle feature snpb assembly pb-free assembly preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maximum 3c/seconds maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maximum 6c/seconds maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum 1rhoohpshudxuhvuhihurkhfhqhurikhsdfndjhphdvxuhgrqkh sdfndjhergvxuidfhkdlvidflqjxsgxulqjdvvhpeouhrz &dvh6lh(3dqg &dvh6lh%&,.056789:dqg= construction s i l v e r a d h e s i v e c a r b o n s i l v e r p a i n t t a n t a l u m w i r e w e l d l e a d f r a m e (-cathode) l e a d f r a m e (+anode) p o l y m e r / t a 2 o 5 /ta kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 10 10 capacitor marking (ko) kemet multi - anode polymer rated voltage 158 3 k 230 km polarity indicator (+) picofarad code kemet id date code* * 230 = 30 th week of 2012 date code * 1 st digit = last number of year 9 = 2009 0 = 2010 1 =2011 2 = 2012 3 = 2013 4 =2014 2 nd and 3 rd digit = week of the year 01 = 1 st week of the year to 52 = 52 nd week of the year storage all ko-c ap series are shipped in moisture barrier bags with a desiccant and moisture indicator card. these series are classifed as msl3 (moisture sensitivity level 3). product contained within the moisture barrier bags should be stored in normal working environments with temperatures not to exceed 40c and humidity not in excess of 60% rh. kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 11 11 tape & reel packaging information kemets molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481C1 : embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity case code tape width (mm) 7" reel* 13" reel* kemet eia i 3216-10 8 3,000 12,000 s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 u 6032-15 12 1,000 5,000 l 6032-19 12 1,000 5,000 : 7343-15 12 1,000 3,000 z 7343-17 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e/t428p 7360-38 12 500 2,000 h 7360-20 12 1,000 2,500 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 12 12 figure 1 C embossed (plastic) carrier tape dimensions p o t f w c en t er li n e s of cav i t y a o b o u s e r d i r e c t i o n o f u n r e elin g c ov er t ap e k o b 1 i s f or t ap e f e ed er r e f e r ence onl y, i ncl u di ng dr a ft con c en t r i c a bou t b o . t 2 ? d 1 ? d o b 1 s 1 t 1 e 1 e 2 p 1 p 2 e m b os s m e nt f or c a v i t y s i z e , s e e n o t e 1 t a b l e 4 [ 1 0 p i t c h e s c um u l at i v e t ol er a n c e o n t a p e 0. 2 m m ] 7deoh2(pervvhg3odvwlf&duulhu7dsh'lphqvlrqv metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm variable dimensions millimeters (inches) w maximum a 0 , b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 16.3 (0.642) 7khhpervvphqkrohorfdlrqvkdooehphdvxuhgiurpkhvsurfnhkrohfrquroolqjkhorfdlrqrikhhpervvphqlphqvlrqvrihpervvphqorfdlrqdqg krohorfdlrqvkdooehdssolhglqghshqghqrihdfkrkhu 7khdshzlkruzlkrxfrpsrqhqvvkdoosdvvdurxqg5zlkrxgdpdjhvhh)ljxuh 3. if s 1 ppprrirfrsrsrsssl(,ssflr 1 dimension is a reference dimension for tape feeder clearance only. fl , b . rfrpsrliflff frpsrrrsrrrsifrifls frpsrfprirpflllflflrlrpflflflrirsfrspr frlrrifrpsrllplrplppirppsplppirpps)l prprifrpsrllfrppplppirpppplsrppplppirpps)l pl(,irlrprsflsllp kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 13 13 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624 . figure 2 C maximum component rotation a o b o t s maxi m u m c ompone n t r o t a tio n t op v i e w m a x i mum c o mponent r o t a t ion s ide v i e w t a p e m axi m u m width (mm) r otati o n ( t ) 8,12 2 0 16 ? 200 1 0 t a p e m a x i m u m widt h ( mm) r o tati o n ( s ) 8,12 20 16 ? 56 1 0 72 ? 200 5 t y p ic a l p o c k e t cente r line t y p i c a l c o m pon e n t c e n t e r l i n e figure 3 C maximum lateral movement 0 . 5 m m m a x i mum 0 . 5 m m m a x i mum 8 m m & 1 2 m m tape 1 . 0 m m m a x i mum 1 . 0 m m m a x i mum 1 6 m m t a p e figure 4 C bending radius r r b end i n g r a d i u s e mbo ssed c a r r i e r p unc hed c a rrier kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 14 14 figure 5 C reel dimensions a d (see n o te ) full r a d i us, see n o t e b ( s ee note) access h o le at s l o t loc a ti on (? 40 m m mi nimum) i f p r es en t, tape slot i n core for t ape start: 2.5 mm minimum wi dt h x 10.0 mm mi n imum dep th w 3 (incl u des flan g e dis to r tion at out e r e dge) w 2 ( m eas u re d a t hub ) w 1 ( m eas u re d a t hub ) c (arbor hol e di a m e ter ) note: driv e spok es o ptiona l ; if u s ed, d i mensi o ns b an d d shall a pply. n 7deoh25hho'lphqvlrqv metric will govern constant dimensions millimeters (inches) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) w 1 : 2 maximum w 3 8 mm 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 15 15 figure 6 C tape leader & trailer dimensions t r a i le r 160 mm min imum c a r r i e r t ape e n d s t a r t r o und s p rocke t h o l e s e l ongated s p r o cke t h o l e s ( 32 mm tape and w i der ) t op c o ver t ape top c over t ape p unched c a r r i e r 8 mm & 12 m m o n l y e mboss ed c a r r i e r c o m p o n e n t s 1 0 0 m m m i n imum leader 4 0 0 mm m i n i m u m figure 7 C maximum camber c a r r i e r t a p e r o u n d s p r o c k e t h ol e s 1 m m max i m u m , e i t h e r d i r e c t i o n s t r ai gh t edge 2 5 0 m m e l o n g a t ed s p r oc k e t h ol e s ( 32 m m & w ide r t a pes ) kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 16 16 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-306-9353 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishops stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 1rh.(0(7uhvhuyhvkhuljkrprgliplqrughdlovrilqhuqdodqghhuqdofrqvuxflrqddqlphlqkhlqhuhvrisurgxflpsuryhphq.(0(7grhvqr dvvxphdquhvsrqvlelolirulqiulqjhphqkdpljkuhvxoiurpkhxvhri.(0(7&dsdflruvlqsrhqldoflufxlghvljqv.(0(7lvduhjlvhuhgudghpdunri .(0(7(ohfurqlfv&rusrudlrq kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t2019_t530 ? 2/3/2014 17 17 other kemet resources tools resource location conf gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask electrolytic lifecalculator http://www.kemet.com:8080/elc product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet organic capacitor (ko-cap) C t530 high capacitance/125c rated polymer tantalum

▲Up To Search▲

Price & Availability of T530X108M004A

	To Download T530X108M004A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .